Best Deals
Electrical Consultancy

 KANAK ENERGY India’s one of homegrown  Energy Efficient Consultancy Service Provider Companey.

 We take this opportunity to introduce ourselves as a team of dedicated and qualified engineers  having  about  thirteen years experience of Designing and commissioning of M.V/L.V electrical  &  industrial  automation  based  system for  various  type  of projects in Electrical Energy Infrastructure, Pharmaceuticals, Metallurgy, Process Industries, Hotels, Auditorium, Crusher Plant, Cement Plants, Printing Press, Food Processing, Big Temples etc and variety of projects ranging from residential colonies, large infrastructure IT infrastructure and industries.

We have set up in house co-ordination team and work on projects design with Support from reputed consultants in the field.  We have worked with them for various projects for last 13 years and have now formed a Consortium to provide one stop service.

We have well equipped office with fully computerized Drawing section, all office automation equipment, authorized software's technically competent staff to use the infrastructure and necessary support staff, supported by systems and procedures established in accordance with ISO 9001:2008 norms.
We render the following type of services to various undertakings:-

  • Consultancy for Electrical/Electronic based system.
  • Designing of various kind of switchgear & control panel.
  • Industrial automation.
Design & Operation Philosophy:-
  • Detail Engineering based on actual data collection.
  • Design Based on Energy Conservation Building Code (ECBC) norms.
  • Safe & Reliable electrical system at optimum costs.
  • Converting detail engineering in appropriate drawings & details.
  • Accurate Quantity Estimation.
  • Two Level Drawing & Data checking.
  • Personalized attention to each project.
Principal Consultant
Er. Rajesh Goyal.
B.E. (Industrial Electronics) 
Certified Energy Auditor from B.E.E &Chartered Engineer
Senior Engineers & Engineers
08 Nos.
Drafting & Contract Drafting
04 Nos.
Support Staff
06 Nos.

We undertake design consultancy through Dedicated Engineering Software for following systems:-
  1. Receiving stations up to 132 kV,
  2. H. T. Distribution & Substations,
  3. Electrical Power & Lighting, Convenience,
  4. Earthing & Lighting Protection,
  5. DG Set Systems,
  6. Security Systems viz. Fire Alarm, CCTV, Access Control,
  7. Communication Provisions,
  8. HVAC 
  1. Data accumulation for electrical & allied systems in our scope through meetings with client and other consultants
  2. Load calculations and assessment of actual demand, possible maximum demands, rating of transformer, substation requirements, D.G. set requirements
  3. Liaison work with Statutory Agencies is not undertaken by us.
  4. Detail engineering of the power system like distribution cables, Panels & Distribution boards, APFC & AMF Panel, cable sizing, power outlets, power wiring. Layouts for the power distribution system. Single line diagrams
  5. Recommendations for Voltage Boost up devices.
  6. Recommendations for Power Factor improvement and control.
  7. Short circuit current analysis on HT/LT side.
  8. Selection of best available Electrical Utilities machinery like Transformer, D.G Set, H.V/L.V Switchgear, Cables, lighting system, etc.
  9. Lighting scheme design for internal and external lighting, lighting layouts with SLDs. Selection of fixtures and detailing of mounting
  10. Detail engineering & layout drawings for lightening protection & Earthing systems
  11. Electrical fault & surge protection system.
  12. Detailing and drawings for communication, fire detection and alarm systems, Security systems if any
  13. Preparation of Technical specification for equipment and works. Preparation of bill of quantities and estimates based on BOQ and Specs
  14. Floating Inquiries / Tenders consisting of;
    • General terms of contract
    • Technical specifications
    • Schedule of quantities
    • Drawings
  15. Technical and commercial comparison of quotes for above recommendation, negotiations, order drafts etc.
  16. Preparation of work schedule and programs based on available information and inputs from clients.
  17. Design of HVAC, Plumbing & Fire Fighting System is done by co-consultants in consortium formed by us.
  18. We take up entire responsibility of services co-ordination.
  1. Shop testing of panels, transformer etc.
  2. Regular site visits to sites monthly / fortnightly depending on the clients/work requirements, for quality survey of work and material progress review meetings
  3. Feedback to client about progress / delays, probable reasons, obstacles, Certification of bills
  4. Measurement & billing help to client engineer / representative. Certification of bills
  5. Testing commissioning checks and witnessing testing and commissioning


Related Product

Energy Audit
Rs. 0.00
Quantity :
Copyright © Kanakenergy | All rights reserved
Home | Contact Us | Shipping FAQ | Shipping & Returns